Techtron Lead Services

Lead paint was widely used in American homes and buildings until it was banned for residential use in 1978. If your property was built before 1978, there’s a real possibility that lead-based paint is still present on walls, trim, doors, windows, or other surfaces. What matters most isn’t just whether lead exists—but whether it poses a risk to the people who live or work there.
 
That’s where Techtron comes in.
 
We provide a full spectrum of lead testing services using advanced XRF (X-ray fluorescence) technology and proven industrial hygiene methods.
 
Our goal is to replace uncertainty with clear, actionable information—quickly and responsibly.
 
Lead-Based Paint Inspections (XRF Testing)
A lead-based paint inspection is designed to identify and measure the lead content of painted surfaces throughout a home or building. Using non-destructive XRF technology, we can test walls, ceilings, trim, doors, windows, railings, and other coated components without damaging them.
 
This inspection tells you:
  • Which surfaces contain lead-based paint
  • The lead concentration of each type of painted surface
  • Where lead-based paint is present throughout the structure
  • What it does not tell you:
  • Whether the lead is currently a health hazard
  • What actions you should take to manage or remove it
  • Think of this as a precise “map” of where lead lives in your building.
 
Lead Risk Assessments (XRF + Environmental Testing)
Is there a real exposure risk—and what should you do about it?
 
A risk assessment goes a step further. In addition to identifying lead-based paint, we evaluate whether any of it is creating dangerous exposure pathways—especially for children and pregnant individuals.
 
This assessment looks for:
  • Peeling, chipping, or deteriorated lead paint
  • Lead-contaminated dust from friction surfaces like windows and doors
  • Lead in settled dust on floors and window sills
  • Other sources of serious lead exposure
 
You receive:
  • A clear determination of whether hazardous conditions exist
  • Practical recommendations for addressing those hazards
  • Guidance on interim controls, maintenance, or abatement strategies
 
This is the service that answers the real-world question: “Is this actually dangerous right now, and what should I do next?”
 
Supporting Lead Testing Services
 
Air Quality Testing
  • Measures airborne particulate levels during renovations, repairs, or disturbance of painted surfaces to evaluate inhalation risks.
 
Dust Wipe Testing
  • Collects and analyzes dust samples from floors, window sills, and other surfaces to detect invisible lead contamination that can be easily ingested or inhaled.
 
On-Site Monitoring
  • Provides real-time or project-based oversight during renovation or abatement activities to ensure lead dust and debris are properly controlled.
 
Fast, On-Site Results
  • From consultation to answers in just a few hours.
  • Techtron offers a true one-stop solution for lead-related concerns. In many cases, we can:
  • Perform inspections and assessments on site
  • Complete XRF testing the same day
  • Deliver results and practical guidance within a few hours
  • No shipping delays. No weeks of waiting. No confusing lab reports without context.
 
Full or Partial Building Inspections
  • Ideal for homebuyers, property managers, landlords, renovation projects, or concerned homeowners.
 
Material Sample Testing
  • You can mail or drop off a paint chip or material sample at Techtron for laboratory analysis if on-site testing isn’t required.
 
Why Techtron?
  • Certified, experienced industrial hygiene professionals
  • Non-destructive XRF testing technology
  • Clear, practical recommendations—not just raw data
  • Rapid turnaround and on-site delivery of results
  • One point of contact from consultation through final report
 
Take the Next Step
If you’re concerned about lead in your home, workplace, or renovation project, Techtron makes the process simple and grounded in real-world practicality.
 
Contact us for more information or request service today!

Lead: Frequently Asked Questions

What should I know about lead?
Lead is a toxic metal that was used for many years in paint and other products found in and around our homes. Lead also can be emitted into the air from industrial sources and leaded aviation gasoline, and lead can enter drinking water from plumbing materials. Lead poisoning is a concern for both children and adults – breathing or eating anything that contains too much lead can cause serious health problems.
 
Young children suffering from lead poisoning can experience learning, behavior and health problems, seizures or death. Children six years old and under are most at risk. Adults exposed to too much lead can suffer from high blood pressure, kidney damage, fertility problems or death.
 
The good news is that lead poisoning is preventable.
There are a number of areas that should be tested before you begin work:
  • Exterior Lead Paint Removal – Lead paint was used on exterior surfaces because it stood up to weather and sunlight.
  • Interior Lead Paint Removal – Areas with chipped and peeling paint (ex. window troughs or wells, sills, on radiators, walls, doors, etc.) should be tested before scraping and repainting.
  • Replacing Doors, Windows and Trim – It may be easier and faster to replace an entire building component rather than remove the paint from it.
  • Carpet Removal – Lead paint chips, dust, and soil can be tracked into the home and get into the carpet. Carpeting can also be contaminated with lead during remodeling or repair work. Steps should be taken to avoid spreading the lead dust that has accumulated in the carpet.
  • Lead Contaminated Soil – Older homes may shed lead paint chips into the soil around the foundation of the house.
About 75% of homes built before 1978 contain some lead-based paint. The older the home, the more likely it is to contain lead-based paint. You should assume that any home built before 1978 contains some lead.
 
Caution: Do not use your household vacuum to clean up paint chips or leaded dust.  The filter in your household vacuum cleaner is not designed to pick up and hold small particles of lead.  Using a regular vacuum cleaner will spread lead dust into the air.
 
Paint. Many homes built before 1978 have lead-based paint. The federal government banned lead-based paint from housing in 1978. Some states stopped its use even earlier. Be aware that lead-based paint may have been used on cribs, highchairs, windows, woodwork, walls, doors, railings, banisters, ceilings, porches and fences. Peeling, chipping, chalking, or cracking lead-based paint is a hazard and needs immediate attention. Painting over chipping or peeling lead-based paint does not make it safe.  You must first safely remove chipping or peeling lead-based paint before repainting. Lead-based paint that is in good condition is usually not a hazard.
 
Household dust. Dust can pick up lead from deteriorated, interior lead-based paint or tracked-in, contaminated soil.  Lead dust can be created during home remodeling or renovation projects, when lead-based paint is dry scraped, dry sanded, or heated. Dust also forms when painted surfaces bump or rub together. Lead chips and dust can get on surfaces and objects that people touch. Settled lead dust can re-enter the air when people vacuum, sweep or walk through it. Household dust is a common source of lead for young children.  Your house can look clean and still have lead in it.
 
Soil. Soil can be contaminated with lead from deteriorated, exterior paint on homes, buildings, or fences. As the result of past use of leaded gasoline, lead can also be found in the soil near major roadways or intersections in urban areas.
 
Drinking water. Lead levels in your water are likely to be highest if your home or water system has lead pipes or copper pipes with lead solder. Plumbing put in before 1930 may contain lead pipes.  Plumbing installed before 1985 may contain lead based solder in the copper joints in the water supply system.  Brass faucets and ball valves may contain lead.  Minnesota banned the use of lead-based solder in 1985. You cannot see, smell or taste lead, and boiling your water will not get rid of lead. If you think your plumbing might have lead in it:
  • Use only cold water for drinking and cooking.
  • Run water for 15 to 30 seconds before drinking it, especially if you have not used your water for a few hours.
The only way to know if your water has lead in it is to have it tested by a certified lab. Techtron Environmental Solutions can test your water for you.
 
Work. If you work with lead, you could bring it home on your hands or clothes. Shower and change clothes before coming home. Launder your work clothes separately from the rest of your family’s clothes.
 
Old painted toys and furniture.
 
Food containers. Food and liquids stored in lead crystal or lead-glazed pottery or porcelain. Food can become contaminated because lead can leach in from these containers.
 
Industry. Lead smelters or other industries that release lead into the air.
 
Hobbies. Hobbies that use lead, such as making pottery or stained glass, or refinishing furniture.
 
Folk remedies. Folk remedies that contain lead, such as “greta” and “azarcon” used to treat an upset stomach.

Helpful Links

Links to outside sources are not controlled or monitored by Techtron are intended for your information only: